State Licensed Contractor, Certified Manufacturer of Modular/Component Structures and Code Compliance Testing
The following are the certifications Kysor Panel has obtained for Testing and Certifications in the area of State Licensed Contractors, State Certified Manufacturer Of Modular/Component Structures, and Code Compliance Tests.
State Licensed Contractor
(This license is not required in all states – out of 50 states contacted 29 did not require licenses.)
State Certified Manufacturer Of Modular/Component Structures This certification is required to obtain and apply State Labels to pre-assembled Environmental Enclosures prior to shipping into the state.
Code Compliance Testing The International Building Code required this testing be done by a nationally recognized third party testing agency. This testing is not acceptable if conducted by the manufacturer or the foam insulation supplier. ASTM C-272 - Water absorption ASTM C-273 – Shear Strength ASTM C-393 – Flexural Strength ASTM C-518 – Thermal Transmission ASTM D-635 – Horizontal Burning ASTM D-1621 – Compressive Properties ASTM D-1622 – Density ASTM D-1623 – Tensile Strength ASTM D-2126 – Dimensional Stability ASTM D-2294 – Adhesion ASTM D-2856 – Open Cell Content ASTM E-72 – Compressive Load, Transverse Load and Racking Load ASTM E-90 – Acoustic Performance ASTM E-331 – Water penetration of exterior walls ASTM E-661 – Concentrated and Impact Loads Cyclic Racking (SEAOSC) Required by the International Building Code for High Seismic Zones CCRR - Code Compliance Research Report – equivalent to ICC evaluation. This report provides National Product Recognition for Code Compliance.